Li-sensor tsa Transmitter tsa Mocheso o Phahameng Li-transmitter tse Boima bakeng sa Likopo tsa Liindasteri ho fihlela ho 200°C HG808-T
Li-sensor tsa mocheso oa mongobo tsa HENGKO® letotong lena li fuoa ntlo e tiileng ea aluminium e nang le karolo ea sensor ea tšepe e sa hloekang ea mocheso le karolo ea probe ea mongobo ho lekanya mongobo o lekanyelitsoeng kapa mongobo o lekanyelitsoeng le mocheso moeeng le likhase tse ling tse seng mabifi bakeng sa mocheso o sebetsang oa ho fihlela ho 200°C. E ka sebelisoa likhatellong tse fihlang ho 8 bar, mochesong o fihlang ho 125°C, kapa ho fihlela ho 160°C. Li-sensor tsena li loketse hantle bakeng sa lits'ebetso tsa indasteri, mohlala, lits'ebetsong tsa ho omisa.
Melemo ea letoto lena ke matla a lona a ntlafetseng, haholo-holo ka lebelo le tlase la moea, le bophelo ba lona bo eketsehileng ba ts'ebeletso, esita le tlas'a maemo a thata a ts'ebetso (tšusumetso e silafatsang kapa mongobo o sa feleng > 90 %rh). Ha lebelo la moea le le holimo haholo hammoho le palo e phahameng ea likaroloana, ho sebelisa letoto lena ha ho khothalletsoe.
Sensor ea mongobo ea HG808-T e boetse e na le mosebetsi oa ho thibela ho koaleha ha mongobo.
Thibelo ea ho kolobisa ke eng?
Tšireletso khahlanong le ho kolobisa ke mokhoa oa tšireletso o sa sebetseng bakeng sa libaka tsa tšepe tse kotsing ea ho thehoa ha marotholi a metsi.
Bokaholimo ba tšepe bo koahetsoe ka lesela le sireletsang le arolang bokaholimo ho lintho tse kotsi tse kang mongobo, letsoai, li-acid, jj.
Seaparo se thibelang ho koaheloa ke metsi se monya metsi ohle a koaheloang ke metsi 'me se a thibela ho rotha.
Likarolo tsa sesebelisoa sa ho fetisa mocheso le mongobo sa letoto la HG808-T:
| Sehlopha | Lintlha tse qaqileng |
|---|---|
| Mohlala | Letoto la HG808-T |
| Libaka tsa Kopo | - Boenjiniere ba ts'ebetso ea mocheso o phahameng - Ho omisa indastering - Mesi e tsoang mosi oa khase o tukang - Likamore tsa liteko - Likhase tse senyang tse tsoang lits'ebetsong tsa peterole le tsa ho hloekisa |
| Sebaka sa Ts'ebetso ea Mocheso | Ho fihlela ho 200°C |
| Likarolo tsa Bohlokoa | - Li-sensor tse hanyetsanang le mocheso o phahameng haholo - Ntlo ea aluminium e tšoarellang - Likarolo tsa tšepe e sa ruseng - Botsitso ba nako e telele le ho hanyetsa mafome |
| Mofuta oa Sephuputso | Li-probe tsa mofuta oa karohano/phaephe tse nang le bokhoni ba ho thibela tšilafalo le ho hanyetsa oli |
| Dikgetho tsa tlhahiso | - Tlhahiso ea RS485 - Liphetho tse peli tsa analog |
| Qeto ea Tlhahiso ea Analog | Li-bits tse 15 tse nang le qeto e phahameng |
| Qeto ea Tlhahiso ea Dijithale | Qeto ea boikhethelo ea 0.1 kapa 0.01 |
| Mosebetsi o hokahaneng le Sensor | Mosebetsi oa ho thibela ho koaleha ha moea ho boloka sensor e hokahantsoe libakeng tse nang le mongobo o phahameng |
| Lipalo tsa Dijithale tsa Tlhahiso | Ka nako e le 'ngoe e bala ntlha ea phoka, mongobo, mocheso le boleng ba PPM |
| Protokhole ea Puisano | Protokhole e tloaelehileng ea Modbus RTU bakeng sa khokahano e bonolo le PLC, DCS, le software e fapaneng ea tlhophiso |
| Kenyelletso ea Motlakase | 10V ~ 28V motlakase o pharaletseng haholo o kenang |
| Likarolo tsa Tšireletso | - Tšireletso ea motlakase o feteletseng - Tšireletso ea polarity ea matla - Tšireletso ea polokeho ea ESD - Mosebetsi oa khokahano ea phepelo ea motlakase khahlanong le ho khutlela morao |
Likopo
✔Theknoloji ea ho baka
✔Indasteri ea lik'hemik'hale
✔ Ho omisa tee, poone, nama
✔Limela tse omisang
✔Mahlale a tikoloho
✔Theknoloji ea lijo
✔Indasteri ea meriana
Likaroloana
Sensor ea Mongobo/Mocheso
Bontša matla a lets'oao
Sehlopha sa theknoloji sa litsebi
Tšehetso le tharollo ea litsebi tse 24/7/365
√Lahlela khetla ea aluminium
Ho se kene moea hantle
.E hanela mafome, e hanela mocheso o phahameng
Ha e kenelle mochesong
IP65 e sa keneleng metsi
√ Mokhoa oa ho hokela
Moralo oa karolo e le 'ngoe/
Ho bonolo ho kenya
①Mothapo oa Flange
②Phaephe e nang le khoele
√ Seteishene sa mongobo
Chip e na le mamello e phahameng ea mocheso ho fihlela ho likhato tse 200 tsa Celsius
Libaka tsa liphaephe tsa moea o pholileng lia sebetsa
.Matlo a sensor a sireletsang, bolelele ba molamu bo ka fetoloa
Khetho ea ho Hlahloba Mongobo
Lintlha tsa Tekheniki
Lintlha tsa Leqephe la Lintlha la HG808-T
Mona ke lintlha tse qaqileng tsa HG808-T Humidity Transmitter:
| Sehlopha | Tlhaloso |
|---|---|
| Boemo ba Thempereichara | -40 ~ +200°C |
| Sebaka sa mongobo | 0 ~ 100% RH (Khothaletso < 95% RH) |
| Ho nepahala ha mocheso | ± 0.1°C (@ 20°C) |
| Ho nepahala ha mongobo | ±2% RH (@ 20°C, 10 ~ 90% RH) |
| Phepelo ea motlakase | DC 10V ~ 28V |
| Tšebeliso ea Matla | < 0.5W |
| Liphetho tsa Analog | Mongobo + Mocheso: 4~20mA / 0-5V / 0-10V (e le 'ngoe ho tse tharo) |
| Tlhahiso ea Dijithale ea RS485 | Mocheso, mongobo, ntlha ea phoka, PPM (bala ka nako e le 'ngoe) |
| Karolelano ea Qeto | 0.01°C / 0.1°C (ha ho hlokahale) 0.01% RH / 0.1% RH (ha ho hlokahale) |
| Sekhahla sa Baud | 1200, 2400, 4800, 9600, 19200, 115200 (kamehla: 9600 bps) |
| Khafetsa ea ho Fumana | Karabelo e potlakileng ka ho fetisisa: motsotsoana o le mong; litlhophiso tse ling ka PLC |
| Sebopeho sa Byte | Li-bits tse 8 tsa data, bit e le 'ngoe ea ho emisa, ha ho na tlhahlobo |
| Khatello ea maikutlo | Bara ea 16 |
| Mocheso o sebetsang | -20°C ~ +60°C, 0% RH ~ 95% RH (Ha e na mouoane) |
| Mofuta oa Sephuputso | Mofuta o arohaneng: Tlhahlobo ea 3 – Mofuta oa karohano ：3A# / 3B# Sephuputso sa 5 – Phaephe ：5A# / 5B# Tlhahlobo ea 6 - Mofuta o arohaneng ：6A# / 6B# |
Kopo
